 |
 |
 |
|
Вернуться на главную |
Нормативных документов |
нормативных документов |
|
|
|
|
|
|
||
|
На
12
мая 2008 года |
LIST
OF ITU‑T
RECOMMENDATIONS IN FORCE (Series Q) Series
Q - Switching
and signalling |
As for 12/05/2008 |
||
|
Перечень действующих рекомендаций МСЭ-Т
серии Q
– Коммутация и
сигнализация |
||||
|
|
|
|
||
|
Signal receivers for manual working |
|
|
Signal receivers for automatic and semi-automatic working, used
for manual working |
|
|
Automatic switching functions for use in
national networks |
|
|
Advantages of semi-automatic service in the international
telephone service |
|
|
Advantages of international automatic working
|
|
|
Signalling systems to be used for international automatic and
semi-automatic telephone working |
|
|
Signalling systems to be used for international
manual and automatic working on analogue leased circuits |
|
|
Vocabulary of switching and signalling terms |
|
|
Overflow - alternative routing - rerouting -
automatic repeat attempt |
|
|
Means to control the number of satellite links in an
international telephone connection |
|
|
Comparative advantages of "in-band"
and "out-band" systems |
|
|
Systems recommended for out-band signalling |
|
|
Frequencies to be used for in-band signalling
|
|
|
Technical features of push-button telephone sets |
|
|
Multifrequency push-button signal reception
|
|
|
Splitting arrangements and signal recognition times in
"in-band" signalling systems |
|
|
Direct access to the international network from
the national network |
|
|
Transmission of the answer signal |
|
|
Determination of the moment of the called
subscriber's answer in the automatic service |
|
|
Causes of noise and ways of reducing noise in telephone exchanges
|
|
|
Improving the reliability of contacts in speech
circuits |
|
|
Noise in a national 4-wire automatic exchange |
|
|
Reduction of the risk of instability by
switching means |
|
|
Protection against the effects of faulty transmission on groups
of circuits |
|
|
Technical characteristics of tones for the
telephone service |
|
|
Attenuation distortion |
|
|
Transmission characteristics of an analogue
international exchange |
|
|
Transmission characteristics of an analogue international
exchange |
|
|
Demand assignment signalling systems |
|
|
Signalling between Circuit Multiplication Equipment (CME) and
International Switching Centres (ISC) |
|
|
Signalling between International Switching
Centres (ISC) and Digital Circuit Multiplication Equipment (DCME) including
the control of compression/decompression |
|
|
Signalling between International Switching Centres (ISC) and
Digital Circuit Multiplication Equipment (DCME) including the control of
compression/decompression over an IP network |
|
|
Signalling between international switching
centres and stand-alone echo control devices |
|
|
Signalling between signal processing network equipment (SPNE) and
international switching centres (ISC) |
|
|
Signalling between signal processing network
equipment (SPNE) and international switching centres (ISC) over an IP network
|
|
|
The unified functional methodology for the characterization of
services and network capabilities including alternative object oriented
techniques |
|
|
Overview of methodology for developing
management services |
|
|
ISDN circuit mode switched bearer services |
|
|
Stage 2 description for packet mode services
|
|
|
Service procedures for Universal Personal Telecommunication -
Functional modelling and information flows |
|
|
Introduction to stage 2 service descriptions
for supplementary services |
|
|
Direct dialling-in |
|
|
Stage 2 description for number identification
supplementary services : Multiple subscriber number
|
|
|
Stage 2 description for number identification supplementary
services : Calling line identification presentation
(CLIP) and calling line identification restriction (CLIR) |
|
|
Stage 2 description for number identification
supplementary services : Connected line
identification, presentation and restriction (COLP) and (COLR) |
|
|
Stage 2 description for number identification supplementary
services : Malicious call identification (MCID)
|
|
|
Stage 2 description for number identification
supplementary services : Sub-addressing (SUB) |
|
|
Stage 2 description for call offering supplementary services : Call transfer |
|
|
Stage 2 description for call offering
supplementary services : Call forwarding |
|
|
Stage 2 description for call offering supplementary services : Call deflection |
|
|
Line hunting |
|
|
Explicit call transfer |
|
|
Stage 2 description for call completion
supplementary services : Call waiting (CW) |
|
|
Call hold |
|
|
Stage 2 description for call completion
supplementary services : Completion of call to busy
subscriber |
|
|
Stage 2 description for call completion supplementary services : Terminal portability |
|
|
Conference calling (CONF) |
|
|
Three-party service |
|
|
Stage 2 description for community of interest
supplementary services : Closed user group |
|
|
Stage 2 description for community of interest supplementary
services : Multi-level precedence and preemption
(MLPP) |
|
|
Global Virtual Network Service (GVNS) |
|
|
Stage 2 description for charging supplementary services : Credit card call |
|
|
Advice of charge (AOC) |
|
|
Reverse charging (REV) |
|
|
International Freephone Service (IFS) |
|
|
International Telecommunication Charge Card (ITCC) |
|
|
User-to-user signalling (UUS) |
|
|
Stage 2 description for additional information transfer
supplementary services : User signalling bearer
services |
|
|
Facilities provided in international
semi-automatic working |
|
|
Facilities provided in international automatic working |
|
|
Numbering used |
|
|
Language digit or discriminating digit |
|
|
National (significant) number |
|
|
The sending-finished signal |
|
|
Standard sending sequence of forward address
information |
|
|
Analysis of forward address information for routing |
|
|
One-way or both-way operation of international
circuits |
|
|
Transmission of the answer signal in international exchanges
|
|
|
General aspects of the utilization of standardized
CCITT signalling systems on PCM links |
|
|
Signal levels and signal receiver sensitivity |
|
|
Connection of signal receivers in the circuit
|
|
|
Typical transmission requirements for signal senders and receivers
|
|
|
Logic for the control of echo control devices
|
|
|
Protocols for the control of signal processing network elements
and functions |
|
|
Logic for the control of echo control devices
and functions |
|
|
Logic for the control of Voice Enhancement Devices/Functions
|
|
|
Indication given to the outgoing operator or
calling subscriber in case of an abnormal condition |
|
|
Alarms for technical staff and arrangements in case of faults
|
|
|
Abnormal conditions - Special release
arrangements |
|
|
Indication of congestion conditions at transit exchanges |
|
|
Specifications of Signalling System No. 4
|
|
|
Specifications of Signalling System No. 5 |
|
|
Specifications of Signalling System No. 6
|
|
|
Specifications of Signalling System R1 |
|
|
Specifications of Signalling System R2 |
|
|
Digital local, combined, transit and international exchanges -
Introduction and field of application |
|
|
Exchange interfaces towards other exchanges
|
|
|
Digital exchange interfaces for subscriber access |
|
|
Digital exchange interfaces for operations,
administration and maintenance |
|
|
Digital exchange functions |
|
|
Digital exchange connections, signalling and
ancillary functions |
|
|
Digital exchange design objectives - General |
|
|
Digital exchange design objectives - Operations
and maintenance |
|
|
Digital exchange performance design objectives |
|
|
Digital exchange measurements |
|
|
Transmission characteristics of digital exchanges |
|
|
Transmission characteristics at 2-wire analogue
interfaces of digital exchanges |
|
|
Transmission characteristics at 4-wire analogue interfaces of
digital exchanges |
|
|
Transmission characteristics at digital interfaces
of digital exchanges |
|
|
Lists and meanings of FITEs, BITEs and SPITEs - Representation of
information contents of signals of the signalling systems |
|
|
Interworking of signalling systems -
Introduction |
|
|
Events |
|
|
Interworking of signalling systems -
Information analysis tables |
|
|
Drawing conventions |
|
|
Logic procedures |
|
|
Interworking requirements for new signalling systems |
|
|
Miscellaneous interworking aspects |
|
|
Logic procedures for incoming signalling system No. 4 |
|
|
Logic procedures for incoming signalling system
No. 5 |
|
|
Logic procedures for incoming signalling system No. 6 |
|
|
Logic procedures for incoming Signalling System
No. 7 (TUP) |
|
|
Logic procedures for incoming signalling system R1 |
|
|
Logic procedures for incoming signalling system
R2 |
|
|
Logic procedures for incoming signalling system No. 7 (ISUP)
|
|
|
Logic procedures for outgoing signalling system
No. 4 |
|
|
Logic procedures for outgoing signalling system No. 5 |
|
|
Logic procedures for outgoing signalling system
No. 6 |
|
|
Logic procedures for outgoing Signalling System No. 7 (TUP)
|
|
|
Logic procedures for outgoing signalling system
R1 |
|
|
Logic procedures for outgoing signalling system R2 |
|
|
Logic procedures for outgoing Signalling System
No. 7 (ISUP) |
|
|
Logic procedures for interworking of signalling system No. 4 to
R2 |
|
|
Logic procedures for interworking of signalling
system No. 5 to No. 6 |
|
|
Logic procedures for interworking of signalling system No. 5 to
No. 7 (TUP) |
|
|
Logic procedures for interworking of signalling
system No. 5 to R1 |
|
|
Logic procedures for interworking of signalling system No. 5 to
R2 |
|
|
Logic procedures for interworking of Signalling
System No. 5 to Signalling System No. 7 (ISUP) |
|
|
Logic procedures for interworking of signalling system No. 6 to
No. 5 |
|
|
Logic procedures for interworking of signalling
system No. 6 to No. 7 (TUP) |
|
|
Logic procedures for interworking of signalling system No. 6 to
R1 |
|
|
Logic procedures for interworking of signalling
system No. 6 to R2 |
|
|
Logic procedures for interworking of Signalling System No. 6 to
Signalling System No. 7 (ISUP) |
|
|
Logic procedures for interworking of signalling
system No. 7 (TUP) to No. 5 |
|
|
Logic procedures for interworking of signalling system No. 7
(TUP) to No. 6 |
|
|
Logic procedures for interworking of signalling
system No. 7 (TUP) to No. 7 (TUP) |
|
|
Logic procedures for interworking of signalling system No. 7
(TUP) to R1 |
|
|
Logic procedures for interworking of signalling
system No. 7 (TUP) to R2 |
|
|
Logic procedures for interworking of Signalling System No. 7
(TUP) to Signalling System No. 7 (ISUP) |
|
|
Logic procedures for interworking of signalling
system R1 to No. 5 |
|
|
Logic procedures for interworking of signalling system R1 to No.
6 |
|
|
Logic procedures for interworking of signalling
system R1 to No. 7 (TUP) |
|
|
Logic procedures for interworking of signalling system R1 to R2
|
|
|
Logic procedures for interworking of Signalling
System R1 to Signalling System No. 7 (ISUP) |
|
|
Logic procedures for interworking of signalling system R2 to No.
4 |
|
|
Logic procedures for interworking of signalling
system R2 to No. 5 |
|
|
Logic procedures for interworking of signalling system R2 to No.
6 |
|
|
Logic procedures for interworking of signalling
system R2 to No. 7 (TUP) |
|
|
Logic procedures for interworking of signalling system R2 to R1
|
|
|
Logic procedures for interworking of Signalling
System R2 to Signalling System No. 7 (ISUP) |
|
|
Logic procedures for interworking of Signalling System No. 7
(ISUP) to No. 5 |
|
|
Logic procedures for interworking of Signalling
System No. 7 (ISUP) to No. 6 |
|
|
Logic procedures for interworking of Signalling System No. 7
(ISUP) to No. 7 (TUP) |
|
|
Logic procedures for interworking of signalling
system No. 7 (ISUP) to R1 |
|
|
Logic procedures for interworking of Signalling System No. 7
(ISUP) to R2 |
|
|
Interworking between the Signalling System No.
7 ISDN User Part (ISUP) and Signalling Systems No. 5, R2 and Signalling
System No. 7 TUP |
|
|
Interworking of Signalling System No. 7 ISUP, TUP and Signalling
System No. 6 using arrow diagrams |
|
|
Interworking between ISDN access and non-ISDN
access over ISDN User Part of Signalling System No. 7 |
|
|
Interworking between ISDN access and non-ISDN access over ISDN
user part of Signalling System No. 7: Support of VPN applications with PSS1
information flows |
|
|
Introduction to CCITT Signalling System No. 7
|
|
|
Functional description of the message transfer part (MTP) of
Signalling System No. 7 |
|
|
Signalling data link |
|
|
Signalling link |
|
|
Signalling network functions and messages
|
|
|
Signalling network structure |
|
|
Message transfer part signalling performance
|
|
|
Testing and maintenance |
|
|
Assignment procedures for international
signalling point codes |
|
|
Hypothetical signalling reference connection |
|
|
Simplified MTP version for small systems |
|
|
Functional description of the signalling connection control part
|
|
|
Definition and function of signalling
connection control part messages |
|
|
Signalling connection control part formats and codes |
|
|
Signalling connection control part procedures
|
|
|
Signalling connection control part user guide |
|
|
Signalling System No. 7 - Signalling connection
control part (SCCP) performance |
|
|
Functional description of the Signalling System No. 7 Telephone
User Part (TUP) |
|
|
General function of telephone messages and signals
|
|
|
Telephone user part formats and codes |
|
|
Telephone user part signalling procedures
|
|
|
Signalling performance in the telephone application |
|
|
ISDN user part supplementary services |
|
|
Direct-dialling-In (DDI) |
|
|
Calling line identification presentation (CLIP)
|
|
|
Calling line identification restriction (CLIR) |
|
|
Connected line identification presentation
(COLP) |
|
|
Connected line identification restriction (COLR) |
|
|
Malicious call identification (MCID) |
|
|
Stage 3 description for number identification supplementary
services using Signalling System No. 7 :
Sub-addressing (SUB) |
|
|
Call diversion services |
|
|
Explicit Call Transfer |
|
|
Call waiting (CW) |
|
|
Stage 3 description for call completion supplementary services
using Signalling System No. 7 : Call hold (HOLD)
|
|
|
Completion of calls to busy subscriber (CCBS)
|
|
|
Stage 3 description for call completion supplementary services
using Signalling System No. 7 : Terminal portability
(TP) |
|
|
Completion of calls on no reply |
|
|
Stage 3 description for multiparty supplementary services using
Signalling System No. 7 : Conference calling |
|
|
Three-party service |
|
|
Closed user group (CUG) |
|
|
Multi-level precedence and preemption |
|
|
Global Virtual Network Service (GVNS) |
|
|
International Telecommunication Charge Card
(ITCC) |
|
|
Reverse charging (REV) |
|
|
User-to-user signalling (UUS) |
|
|
Overview of Signalling System No. 7 management |
|
|
Network element management information model
for the Message Transfer Part (MTP) |
|
|
Network element management information model for the Signalling
Connection Control Part |
|
|
Network element information model for MTP
accounting |
|
|
Network element information model for SCCP accounting and
accounting verification |
|
|
Monitoring and measurements for Signalling
System No. 7 networks |
|
|
Signalling System No. 7 management functions MRVT, SRVT and CVT
and definition of the OMASE-user |
|
|
Signalling System No. 7 management Application
Service Element (ASE) definitions |
|
|
Signalling System No. 7 protocol tests |
|
|
MTP Protocol Tester |
|
|
Transaction capabilities test responder |
|
|
Guidebook to Operations, Maintenance and
Administration Part (OMAP) |
|
|
Signalling System No. 7 - ISDN User Part functional description
|
|
|
Signalling System No. 7 - ISDN User Part
general functions of messages and signals |
|
|
Signalling System No. 7 - ISDN User Part formats and codes |
|
|
Signalling System No. 7 - ISDN User Part
signalling procedures |
|
|
Signalling system No. 7 - Application transport mechanism |
|
|
Signalling system No. 7 - Application transport
mechanism: Test suite structure and test purposes (TSS & TP) |
|
|
Signalling system No. 7 - Application transport mechanism:
Support of VPN applications with PSS1 information flows |
|
|
Abstract test suite for the APM support of VPN
applications |
|
|
Signalling system No. 7 - Application transport mechanism:
Support of the generic addressing and transport protocol |
|
|
Signalling system No. 7 - Application transport
mechanism: Bearer Independent Call Control (BICC) |
|
|
Performance objectives in the integrated services digital network
application |
|
|
Application of the ISDN User Part of CCITT
signalling system No. 7 for international ISDN interconnections |
|
|
Signalling interface between an international switching centre
and an ISDN satellite subnetwork |
|
|
Signalling system No. 7 - ISDN user part
enhancements for the support of number portability |
|
|
Functional description of transaction capabilities |
|
|
Transaction capabilities information element
definitions |
|
|
Transaction capabilities formats and encoding |
|
|
Transaction capabilities procedures |
|
|
Guidelines for using transaction capabilities |
|
|
Signalling System No. 7 test specification -
General description |
|
|
MTP level 2 test specification |
|
|
MTP level 3 test specification |
|
|
TUP test specification |
|
|
TTCN version of Recommendation Q.784 |
|
|
ISUP basic call test specification: Validation and compatibility
for ISUP'92 and Q.767 protocols |
|
|
ISUP basic call test specification: Abstract
test suite for ISUP'92 basic call control procedures |
|
|
ISUP '97 basic call control procedures - Test suite structure and
test purposes (TSS & TP) |
|
|
ISUP protocol test specification for
supplementary services |
|
|
ISUP’97 supplementary services - Test suite structure and test
purposes (TSS & TP) |
|
|
SCCP test specification |
|
|
Transaction Capabilities (TC) test specification |
|
|
User-network-interface to
user-network-interface compatibility test specifications for ISDN, non-ISDN
and undetermined accesses interworking over international ISUP |
|
|
Lower layer protocol profiles for the Q and X interfaces |
|
|
Upper layer protocol profiles for the Q and X
interfaces |
|
|
Security Transformations Application Service Element for Remote
Operations Service Element (STASE-ROSE) |
|
|
Specification of an electronic data interchange
interactive agent |
|
|
Specification of a security module for whole message protection
|
|
|
CORBA-based TMN services |
|
|
CORBA-based TMN services: Extensions to support coarse-grained
interfaces |
|
|
CORBA-based TMN services: Extensions to support
service-oriented interfaces |
|
|
TMN PKI - Digital certificates and certificate revocation lists
profiles |
|
|
Stage 2 and Stage 3 description for the Q3
interface - Alarm Surveillance |
|
|
CORBA-based TMN alarm surveillance service |
|
|
Stage 1, stage 2 and stage 3 description for
the Q3 interface - Performance management |
|
|
CORBA-based TMN performance management service |
|
|
Stage 2 and stage 3 functional specifications
for traffic management |
|
|
Management Conformance Statement Proformas |
|
|
Common information |
|
|
Integrated Services Digital Network (ISDN) basic and primary rate
access |
|
|
Integrated Services Digital Network (ISDN)
supplementary services |
|
|
Integrated Services Digital Network (ISDN) optional user
facilities |
|
|
Integrated Services Digital Network (ISDN)
teleservices |
|
|
Configuration management of V5 interface environments and
associated customer profiles |
|
|
Broadband switch management |
|
|
Enhanced Broadband Switch |
|
|
Specification of TMN applications at the Q3
interface: Call detail recording |
|
|
Routing management model |
|
|
Requirements and analysis for the common
management functions of NMS-EMS interfaces |
|
|
Fault and performance management of V5 interface environments and
associated customer profiles |
|
|
Access Management for V5 |
|
|
VB5.1 Management |
|
|
VB5.2 Management |
|
|
Broadband access coordination |
|
|
Asymmetric digital subscriber line (ADSL) -
Network element management: CMIP model |
|
|
ATM-PON requirements and managed entities for the network and
network element views |
|
|
A UML description for management interface
requirements for broadband Passive Optical Networks |
|
|
A CORBA interface specification for Broadband Passive Optical
Networks based on UML interface requirements |
|
|
Line and line circuit test management of ISDN
and analogue customer accesses |
|
|
SSF management information model |
|
|
SDH-DLC functional requirements for the network
and network element views |
|
|
Use case descriptions and analysis for SDH-DLC network level
management interface |
|
|
Requirements and analysis for the management
interface of Ethernet passive optical networks (EPON) |
|
|
Requirements and Analysis for NMS-EMS Management Interface of
Ethernet over Transport and Metro Ethernet Network (EoT/MEN) |
|
|
Usage of cause and location in the Digital
Subscriber Signalling System No. 1 and the Signalling System No. 7 ISDN User
Part |
|
|
Integrated services digital network (ISDN) and broadband
integrated services digital network (B-ISDN) generic addressing and transport
(GAT) protocol |
|
|
ISDN user-network interface data link layer -
General aspects |
|
|
ISDN user-network interface - Data link layer specification
|
|
|
Abstract test suite for LAPD conformance
testing |
|
|
ISDN data link layer specification for frame mode bearer services
|
|
|
Specification of a synchronization and
coordination function for the provision of the OSI connection-mode network
service in an ISDN environment |
|
|
ISDN user-network interface layer 3 - General aspects |
|
|
ISDN user-network interface layer 3
specification for basic call control |
|
|
Digital subscriber signalling system No. 1 - Generic procedures
for the control of ISDN supplementary services |
|
|
ISDN Digital Subscriber Signalling System No. 1
(DSS1) - Signalling specifications for frame mode switched and permanent
virtual connection control and status monitoring |
|
|
Abstract test suite - Signalling specification for frame mode
basic call control conformance testing for permanent virtual connections
(PVCs) |
|
|
Typical DSS 1 service indicator codings for
ISDN telecommunications services |
|
|
ISDN user-network interface protocol for management - General
aspects |
|
|
ISDN user-network interface protocol profile
for management |
|
|
Supplementary services protocols, structure and general
principles |
|
|
Direct-dialling-in (DDI) |
|
|
Multiple subscriber number (MSN) |
|
|
Calling line identification presentation |
|
|
Calling line identification restriction |
|
|
Connected line identification presentation
|
|
|
Connected line identification restriction |
|
|
Malicious Call Identification (MCID) |
|
|
Sub-addressing (SUB) |
|
|
Stage 3 description for call offering
supplementary services using DSS 1 - Diversion supplementary services
|
|
|
Stage 3 description for call offering supplementary services
using DSS 1 - Explicit Call Transfer (ECT) |
|
|
Call waiting |
|
|
Call hold |
|
|
Completion of Calls to Busy
Subscribers (CCBS) |
|
|
Terminal Portability (TP) |
|
|
Stage 3 description for call completion
supplementary services using DSS 1 : Call Completion
on No Reply (CCNR) |
|
|
Stage 3 description for multiparty supplementary services using
DSS 1 : Conference calling |
|
|
Three-party (3PTY) |
|
|
Closed user group |
|
|
Multi-level precedence and preemption (MLPP)
|
|
|
Advice of charge |
|
|
Reverse charging |
|
|
User-to-User Signalling (UUS) |
|
|
General aspects of public land mobile networks
|
|
|
Structure of the Recommendations on the INMARSAT mobile satellite
systems |
|
|
General requirements for the interworking of
the terrestrial telephone network and INMARSAT Standard A system |
|
|
Interworking between Signalling System R2 and INMARSAT Standard A
system |
|
|
Interworking between Signalling System No. 5
and INMARSAT Standard A system |
|
|
Interfaces between the INMARSAT Standard B system and the
international public switched telephone network/ISDN |
|
|
Procedures for interworking between INMARSAT
Standard-B system and the international public switched telephone
network/ISDN |
|
|
Interfaces for interworking between the INMARSAT aeronautical
mobile-satellite system and the international public switched telephone
network/ISDN |
|
|
Procedures for interworking between INMARSAT
aeronautical mobile satellite system and the international public switched
telephone network/ISDN |
|
|
General series Intelligent Network Recommendation structure
|
|
|
Principles of intelligent network architecture
|
|
|
Intelligent network - Service plane architecture |
|
|
Intelligent network - Global functional plane
architecture |
|
|
Intelligent network distributed functional plane architecture
|
|
|
Intelligent network physical plane architecture
|
|
|
General aspects of the Intelligent Network Application protocol
|
|
|
Q.1210-series intelligent network
Recommendation structure |
|
|
Introduction to intelligent network capability set 1 |
|
|
Global functional plane for intelligent network
CS-1 |
|
|
Distributed functional plane for intelligent network CS-1 |
|
|
Physical plane for intelligent network CS-1
|
|
|
Interface Recommendation for intelligent network CS-1 |
|
|
Intelligent network user's guide for Capability
Set 1 |
|
|
Q.1220-series Intelligent Network Capability Set 2 Recommendation
structure |
|
|
Introduction to Intelligent Network Capability
Set 2 |
|
|
Service plane for Intelligent Network Capability Set 2 |
|
|
Global functional plane for intelligent network
Capability Set 2 |
|
|
Distributed functional plane for intelligent network Capability
Set 2 |
|
|
Physical plane for Intelligent Network Capability
Set 2 |
|
|
Interface Recommendation for intelligent network Capability Set 2
|
|
|
Intelligent Network user's guide for Capability
Set 2 |
|
|
Introduction to Intelligent Network Capability Set 3 |
|
|
Intelligent Network Capability Set 3 -
Management Information Model Requirements and Methodology |
|
|
Extensions to Intelligent Network Capability Set 3 in support of
B-ISDN |
|
|
Common aspects |
|
|
Interface Recommendation for intelligent network capability set 3 : SCF-SSF interface |
|
|
Interface Recommendation for intelligent
network capability set 3 : SCF-SRF interface |
|
|
Interface Recommendation for intelligent network capability set 3 : SCF-SDF interface |
|
|
Interface Recommendation for intelligent
network capability set 3 : SDF-SDF interface |
|
|
Interface Recommendation for intelligent network capability set
3: SCF-SCF interface |
|
|
Interface Recommendation for intelligent
network capability set 3 : SCF-CUSF interface |
|
|
Introduction to Intelligent Network Capability Set 4 |
|
|
Distributed functional plane for Intelligent
Network Capability Set 4 |
|
|
Interface Recommendation for Intelligent Network Capability Set
4: Common aspects |
|
|
Interface recommendation for Intelligent
Network Capability Set 4: SCF-SSF Interface |
|
|
Interface recommendation for Intelligent Network Capability Set 4 : Interface Recommendation for Intelligent Network
Capability Set 4: SCF-SRF interface |
|
|
Interface Recommendation for Intelligent
Network Capability Set 4: SCF-SDF interface |
|
|
Interface recommendation for Intelligent Network Capability Set 4 : Interface Recommendation for Intelligent Network
Capability Set 4: SDF-SDF interface |
|
|
Interface Recommendation for Intelligent
Network Capability Set 4: SCF-SCF interface |
|
|
Interface Recommendation for Intelligent Network capability set
4: SCF-CUSF Interface |
|
|
Glossary of terms used in the definition of
intelligent networks |
|
|
Telecommunication applications for switches and computers (TASC)
- General overview |
|
|
Telecommunication applications for switches and
computers (TASC) - TASC Architecture |
|
|
Telecommunication applications for switches and computers (TASC)
- TASC functional services |
|
|
Telecommunication applications for switches and
computers (TASC) - TASC Management: Architecture, methodology and
requirements |
|
|
Architecture framework for the development of signalling and
OA&M protocols using OSI concepts |
|
|
Requirements on underlying networks and
signalling protocols to support UPT |
|
|
UPT security requirements for Service Set 1 |
|
|
UPT stage 2 for Service Set 1 on IN CS-1 -
Procedures for universal personal telecommunication: Functional modelling and
information flows |
|
|
UPT stage 2 for Service Set 1 on IN CS-2 - Procedures for
universal personal telecommunication: Functional modelling and information
flows |
|
|
Application of Intelligent Network Application
Protocols (INAP) CS-1 for UPT service set 1 |
|
|
Signalling System No. 7 - Interaction between ISUP and INAP
|
|
|
Signalling system No. 7 - Interaction between
ISDN user part ISUP '97 and INAP CS-1: Test suite structure and test purposes
(TSS & TP) |
|
|
Signalling system No. 7 - Interaction between N-ISDN and INAP
CS-2 |
|
|
Framework for IMT-2000 networks |
|
|
Long-term vision of network aspects for systems beyond IMT-2000
|
|
|
Service and network capabilities framework of
network aspects for systems beyond IMT-2000 |
|
|
Mobility management requirements for NGN |
|
|
Generic framework of mobility management for
next generation networks |
|
|
Network functional model for IMT-2000 |
|
|
Information flows for IMT-2000 capability set 1
|
|
|
Radio-technology independent requirements for IMT-2000 layer 2
radio interface |
|
|
IMT-2000 references to release 1999 of GSM
evolved UMTS core network with UTRAN access network |
|
|
IMT-2000 references to release 4 of GSM evolved UMTS core network
with UTRAN access network |
|
|
IMT-2000 references to release 5 of GSM evolved
UMTS core network |
|
|
IMT-2000 References to Release 6 of GSM evolved UMTS Core Network
|
|
|
IMT-2000 references to ANSI-41 evolved core
network with cdma2000 access network |
|
|
IMT-2000 references (approved as of 11 July 2002) to ANSI-41
evolved core network with cdma2000 access network |
|
|
IMT-2000 references (approved as of 30 June
2003) to ANSI-41 evolved core network with cdma2000 access network |
|
|
IMT-2000 references (approved as of 30 June 2004) to ANSI-41
evolved core network with cdma2000 access network |
|
|
IMT 2000 references (approved as of 31 December
2005) to ANSI-41 evolved core network with cdma2000 access network |
|
|
IMT-2000 References (approved as of 31 December 2006) to ANSI-41
evolved Core Network with cdma2000 Access Network |
|
|
Internetwork signalling requirements for
IMT-2000 capability set 1 |
|
|
Principles and requirements for convergence of fixed and existing
IMT-2000 systems |
|
|
Fixed-mobile convergence general requirements
|
|
|
FMC service using legacy PSTN or ISDN as the fixed access network
for mobile network users |
|
|
Bearer Independent Call Control protocol |
|
|
Bearer Independent Call Control protocol (Capability Set 2):
Functional description |
|
|
Bearer Independent Call Control protocol (Capability
Set 2) and Signalling System No.7 ISDN User Part: General functions of
messages and parameters |
|
|
Bearer Independent Call Control protocol (Capability Set 2) and
Signalling System No.7 ISDN User Part: Formats and codes |
|
|
Bearer Independent Call Control protocol
(Capability Set 2): Basic call procedures |
|
|
Bearer Independent Call Control protocol (Capability Set 2):
Exceptions to the application transport mechanism in the context of BICC
|
|
|
Bearer Independent Call Control protocol
(Capability Set 2): Generic signalling procedures for the support of the ISDN
user part supplementary services and for bearer redirection |
|
|
Interworking between Signalling System No. 7 ISDN user part and
the Bearer Independent Call Control protocol |
|
|
Interworking between selected signalling
systems (PSTN access, DSS1, C5, R1, R2, TUP) and the Bearer Independent Call
Control protocol |
|
|
Interworking between H.323 and the Bearer Independent Call
Control protocol |
|
|
Interworking between Digital Subscriber
Signalling System No. 2 and the Bearer Independent Call Control protocol
|
|
|
Interworking between Session Initiation Protocol (SIP) and Bearer
Independent Call Control protocol or ISDN User Part |
|
|
Interaction between the Intelligent Network
Application Protocol Capability Set 2 and the Bearer Independent Call Control
protocol |
|
|
Interaction between the Intelligent Network application CS-4
protocol and the Bearer Independent Call Control protocol |
|
|
BICC access network protocol |
|
|
Bearer independent call bearer control protocol |
|
|
BICC IP Bearer control protocol |
|
|
The Narrowband Signalling Syntax (NSS) - Syntax definition |
|
|
BICC Bearer Control Tunnelling Protocol |
|
|
Broadband integrated services digital network overview -
Signalling capability set 1, release 1 |
|
|
B-ISDN signalling ATM adaptation layer (SAAL) -
Overview description |
|
|
B-ISDN ATM adaptation layer - Service specific connection
oriented protocol (SSCOP) |
|
|
B-ISDN ATM adaptation layer - Service specific
connection oriented protocol in a multilink and connectionless environment
(SSCOPMCE) |
|
|
B-ISDN ATM adaptation layer - Convergence function for SSCOP
above the frame relay core service |
|
|
B-ISDN meta-signalling protocol |
|
|
B-ISDN signalling ATM adaptation layer - Service specific
coordination function for support of signalling at the user-network interface
(SSCF at UNI) |
|
|
B-ISDN ATM adaptation layer - Service specific
coordination function for signalling at the network node interface (SSCF at
NNI) |
|
|
B-ISDN signalling ATM adaptation layer - Layer management for the
SAAL at the network node interface |
|
|
Generic signalling transport service |
|
|
Signalling transport converter on MTP3 and MTP3b |
|
|
Signalling transport converter on SSCOP and
SSCOPMCE |
|
|
Signalling transport converter on SCTP |
|
|
Message transfer part level 3 functions and
messages using the services of ITU-T Recommendation Q.2140 |
|
|
Transport-Independent Signalling Connection Control Part
(TI-SCCP) |
|
|
Usage of cause and location in B-ISDN user part
and DSS2 |
|
|
AAL type 2 signalling protocol (Capability Set 1) |
|
|
AAL type 2 signalling protocol - Capability Set
2 |
|
|
AAL type 2 signalling protocol - Capability Set 3 |
|
|
Interworking between AAL type 2 signalling
protocol Capability Set 2 and IP connection control signalling protocol
Capability Set 1 |
|
|
Interworking between AAL type 2 signalling protocol Capability
Set 2 and IP connection control signalling protocol Capability Set 1 |
|
|
Interworking between signalling system No. 7
broadband ISDN User Part (B-ISUP) and digital subscriber signalling system
No. 2 (DSS2) |
|
|
Interworking between signalling system No. 7 broadband ISDN user
part (B-ISUP) and narrow-band ISDN user part (N-ISUP) |
|
|
B-ISDN user part - Network node interface
specification for point-to-multipoint call/connection control |
|
|
B-ISDN user part - Look-ahead without state change for the
network node interface |
|
|
B-ISDN user part - Call priority |
|
|
B-ISDN user part - Network generated session identifier |
|
|
Extensions to the B-ISDN user part -
Application generated identifiers |
|
|
Signalling system No. 7 B-ISDN user part (B-ISUP) - Supplementary
services |
|
|
Closed User Group (CUG) |
|
|
Extension of Q.751.1 for SAAL signalling links |
|
|
Functional description of the B-ISDN user part
(B-ISUP) of signalling system No. 7 |
|
|
General functions of messages and signals of the B-ISDN User Part
(B-ISUP) of Signalling System No. 7 |
|
|
Signalling System No. 7 B-ISDN User Part
(B-ISUP) - Formats and codes |
|
|
Signalling System No. 7 B-ISDN User Part (B-ISUP) - Basic call
procedures |
|
|
Signalling System No. 7 B-ISDN User Part
(B-ISUP) - Application transport mechanism (APM) |
|
|
Switched virtual path capability |
|
|
Soft PVC capability |
|
|
Support of number portability information across B-ISUP |
|
|
Broadband integrated services digital network
(B-ISDN) - Digital Subscriber Signalling System No. 2 (DSS 2):
Call/connection control for the support of ATM-MPLS network interworking
|
|
|
Digital Subscriber Signalling System No. 2 - User-Network
Interface (UNI) layer 3 specification for basic call/connection control
|
|
|
Broadband integrated services digital network
(B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network
interface (UNI) layer 3 specification for basic call/connection control:
Protocol implementation conformance statement (PICS) proforma |
|
|
Broadband integrated services digital network (B-ISDN) - Digital
subscriber signalling system No. 2 (DSS2) - User-network interface (UNI)
layer 3 specification for basic call/connection control: Test suite structure
and test purposes (TSS & TP) for the user |
|
|
Broadband integrated services digital network
(B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network
interface (UNI) layer 3 specification for basic call/connection control:
Abstract Test Suite (ATS) and partial Protocol Implementation eXtra
Information for Testing (PIXIT) proforma for the user |
|
|
Broadband integrated services digital network (B-ISDN) - Digital
subscriber signalling system No. 2 (DSS2) - User-network interface (UNI)
layer 3 specification for basic call/connection control: Test suite structure
and test purposes (TSS & TP) for the network |
|
|
Broadband integrated services digital network
(B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network
interface (UNI) layer 3 specification for basic call/connection control:
Abstract Test Suite (ATS) and partial Protocol Implementation eXtra
Information for Testing (PIXIT) proforma for the network |
|
|
Core functions |
|
|
Digital subscriber signalling system No. 2 -
Signalling specification for frame relay service |
|
|
Digital subscriber signalling system No. 2 - Switched virtual
path capability |
|
|
Digital Subscriber Signalling System No. 2 -
Application of DSS2 service-related information elements by equipment
supporting B-ISDN services |
|
|
Digital Subscriber Signalling System No. 2 - Generic identifier
transport |
|
|
Digital Subscriber Signalling System No. 2 -
Generic identifier transport extensions |
|
|
Digital Subscriber Signalling System No. 2 - Generic identifier
transport extension for support of bearer independent call control |
|
|
Stage 3 description for number identification
supplementary services using B-ISDN Digital Subscriber Signalling System No.
2 (DSS2 ) - Basic Call |
|
|
Support of ATM end system addressing format by Number
identification supplementary services |
|
|
Closed User Group (CUG) |
|
|
Stage 3 description for additional information transfer
supplementary services using B-ISDN digital subscriber signalling system No.
2 (DSS2) - Basic call : User-to-user signalling
(UUS) |
|
|
Digital subscriber signalling system No. 2 -
Call priority |
|
|
Digital subscriber signalling system No. 2 (DSS 2) - Additional
traffic parameters: Protocol implementation conformance statement (PICS)
proforma |
|
|
Digital subscriber signalling system No. 2 (DSS
2) - Additional traffic parameters: Test Suite Structure and Test Purposes
(TSS & TP) for the user |
|
|
Digital subscriber signalling system No. 2 (DSS 2) - Additional
traffic parameters: Abstract Test Suite (ATS) and partial Protocol
Implementation eXtra Information for Testing (PIXIT) proforma for the user
|
|
|
Digital subscriber signalling system No. 2 (DSS
2) - Additional traffic parameters: Test Suite Structure and Test Purposes
(TSS & TP) for the network |
|
|
Digital subscriber signalling system No. 2 (DSS 2) - Additional
traffic parameters: Abstract Test Suite (ATS) and partial Protocol Implementation
eXtra Information for Testing (PIXIT) proforma for the Network |
|
|
Additional signalling capabilities to support
traffic parameters for the tagging option and the sustainable cell rate
parameter set |
|
|
Digital subscriber signalling system No. 2 - Additional traffic
parameters : Support of ATM Transfer capability in
the broadband bearer capability information element |
|
|
Signalling capabilities to support traffic
parameters for the available bit rate (ABR) ATM transfer capability |
|
|
Signalling capabilities to support traffic parameters for the ATM
Block Transfer (ABT) ATM transfer capability |
|
|
Additional traffic parameters for cell delay
variation tolerance indication |
|
|
Additional signalling procedures for the support of the SBR2 and
SBR3 ATM transfer capabilities |
|
|
Digital subscriber signalling system No. 2 -
Connection characteristics negotiation during call/connection establishment
phase |
|
|
Digital subscriber signalling system No. 2 - Connection
characteristics negotiation during call/connection establishment phase:
Protocol Implementation Conformance Statement (PICS) proforma |
|
|
Digital subscriber signalling system No. 2 -
Connection characteristics negotiation during call/connection establishment
phase: Test suite structure and test purposes (TSS & TP) for the user
|
|
|
Digital subscriber signalling system No. 2 - Connection
characteristics negotiation during call/connection establishment phase:
Abstract test suite (ATS) and partial protocol implementation extra
information for testing (PIXIT) proforma for the user |
|
|
Digital subscriber signalling system No. 2 -
Connection characteristics negotiation during call/connection establishment
phase: Test suite structure and test purposes (TSS & TP) for the network
|
|
|
Digital subscriber signalling system No. 2 - Connection
characteristics negotiation during call/connection establishment phase:
Abstract test suite (ATS) and partial protocol Implementation extra
information for testing (PIXIT) proforma for the network |
|
|
Peak cell rate modification by the connection
owner |
|
|
Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner:
Protocol implementation conformance statement (PICS) proforma |
|
|
Digital subscriber signalling system No. 2 -
Connection modification : Peak cell rate
modification by the connection owner: Test suite structure and test purposes
(TSS & TP) for the user |
|
|
Digital subscriber signalling system No. 2 - Connection
modification : Peak cell rate modification by the
connection owner: Abstract test suite (ATS) and partial protocol
implementation extra information for testing (PIXIT) proforma for the user
|
|
|
Digital subscriber signalling system No. 2 -
Connection modification : Peak cell rate
modification by the connection owner: Test suite structure and test purposes
(TSS & TP) for the network |
|
|
Digital subscriber signalling system No. 2 - Connection
modification : Peak cell rate modification by the
connection owner: Abstract test suite (ATS) and partial protocol
implementation extra information for testing (PIXIT) proforma for the network
|
|
|
Modification procedures for sustainable cell
rate parameters |
|
|
ATM traffic descriptor modification with negotiation by the
connection owner |
|
|
Digital subscriber signalling system No. 2 -
Basic look-ahead |
|
|
Digital subscriber signalling system No. 2 - Support of Quality
of Service classes |
|
|
Digital subscriber signalling system No. 2 -
Support of Quality of Service classes: Protocol Implementation Conformance
Statement (PICS) proforma |
|
|
Digital subscriber signalling system No. 2 - Signalling of
individual Quality of Service parameters |
|
|
Digital subscriber signalling system No. 2 -
Signalling of individual Quality of Service parameters: Protocol
Implementation Conformance Statement (PICS) proforma |
|
|
Digital Subscriber Signalling System No. 2 (DSS2) - User-network
interface layer 3 specification for point-to-multipoint call/connection
control |
|
|
Digital Subscriber signalling system No. 2 -
User-network interface layer 3 specification for point-to-multipoint
call/connection control: Test Suite Structure and Test Purposes (TSS &
TP) for the user |
|
|
Digital subscriber signalling system No. 2 - User-network
interface layer 3 specification for point-to-multipoint call/connection
control: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra
Information for Testing (PIXIT) proforma for the user |
|
|
Digital subscriber signalling system No. 2 -
User-network interface layer 3 specification for point-to-multipoint
call/connection control: Test Suite Structure and Test Purposes (TSS &
TP) for the network |
|
|
Digital Subscriber Signalling System No. 2 - User-network
interface layer 3 specification for point-to-multipoint call/connection
control: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra
Information for Testing (PIXIT) proforma for the network |
|
|
Broadband Integrated Services Digital Network
(B-ISDN) and Broadband Private Integrated Services Network (B-PISN) call
control protocol |
|
|
Broadband integrated services digital network (B-ISDN) - Digital
Subscriber Signalling System No. 2 (DSS2) - Q.2931-based separated call
control protocol |
|
|
Broadband integrated services digital network
(B-ISDN) - Digital subscriber signalling No. 2 (DSS2) - Bearer control
protocol |
|
|
Broadband integrated services digital network (B-ISDN) and
broadband private integrated services network (B-PISN) - Pre-negotiation
|
|
|
TSS & TP |
|
|
ICS & IXIT and ATS |
|
|
Signalling architecture for the NGN service
control plane |
|
|
Use of virtual trunks for ATM/MPLS client/server control plane
interworking |
|
|
ATM and frame relay/MPLS control plane
interworking: Client-server |
|
|
EAP-based security signalling protocol architecture for network
attachments |
|
|
Architectural framework for the Q.33xx series
of Recommendations |
|
|
Resource control protocol - Protocol at the Rs interface |
|
|
Resource control protocol - Protocol at the Rp
interface |
|
|
Protocol at the interface between a Policy Decision Physical
Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE) (Rw
interface): Overview |
|
|
Protocol at the interface between a Policy
Decision Physical Entity (PD-PE) and a Policy Enforcement Physical Entity
(PE-PE): COPS Alternative |
|
|
Protocol at the interface between a Policy Decision Physical
Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE) (Rw
interface): H.248 Alternative |
|
|
Resource control protocol no. 4 (rcp4).
Protocol at the interface between a transport resource control physical
entity (TRC-PE) and a transport physical entity (T-PE) (Rc interface): COPS
alternative |
|
|
Resource control protocol no. 4 SNMP Profile. Protocol at the Rc
interface between a transport resource control physical entity (TRC-PE) and a
transport physical entity (T-PE) (Rc interface) |
|
|
NGN NNI signalling profile |
|
|
NGN UNI signalling profile (Protocol set 1) |
|
|
Methods of testing and model network architecture
for NGN technical means testing as applied to public telecommunication
networks |
|
|
Distribution of tests and services for NGN technical means
testing in the model and operator networks |
|
|
Parameters to be monitored in the process of
operation when implementing NGN technical means in public telecommunication
networks |
|
|
Definition of relative levels, transmission loss and
attenuation/frequency distortion for digital exchanges with complex impedances
at Z interfaces |
|
|
Impedance strategy for telephone instruments
and digital local exchanges in the British Telecom Network |
|
|
Signalling System No. 7 testing and planning tools |
|
|
Intelligent network user's guide: Supplement
for IN CS-1 |
|
|
Number portability - Scope and capability set 1 architecture
|
|
|
Number portability - Capability set 1
requirements for service provider portability (All call query and Onward
routing) |
|
|
Number portability - Capability set 2 requirements for service
provider portabilty (Query on release and Dropback) |
|
|
Technical report TRQ.2000: Roadmap for the
TRQ.2xxx-series technical reports |
|
|
Technical report TRQ.2001: General aspects for the development of
unified signalling requirements |
|
|
Technical report TRQ.2400: Transport control
signalling requirements - Signalling requirements for AAL Type 2 link control
capability set 1 |
|
|
Technical Report TRQ.2000: Roadmap for the TRQ.2xxx-series
Technical Reports |
|
|
Technical Report TRQ.2002: Information Flow
Elements |
|
|
Technical Report TRQ.2010: B-ISDN signalling interworking
requirements |
|
|
Technical Report TRQ.2100: Coordinated call
control and bearer control signalling requirements - Root-party coordinated
call and bearer control |
|
|
Technical Report TRQ.2110: Coordinated call control and bearer
control signalling requirements - Leaf-party coordinated call and bearer
control |
|
|
Technical Report TRQ.2120: Coordinated call
control and bearer control signalling requirements - Third-party coordinated
call and bearer control |
|
|
Technical Report TRQ.2130: Coordinated call control and bearer
control signalling requirements for leaf initiated join service |
|
|
Technical Report TRQ.2140 |
|
|
Technical Report TRQ.2200 |
|
|
Technical Report TRQ.2230 |
|
|
Technical Report TRQ.2300: Bearer control signalling requirements
- Root-party bearer control |
|
|
Technical Report TRQ.2310: Bearer control
signalling requirements - Leaf-party bearer control |
|
|
Technical Report TRQ.2320 |
|
|
Technical Report TRQ.3000: Operation of the
bearer independant call control (BICC) protocol with digital subscriber
signalling system No. 2 (DSS2) |
|
|
Supplement to ITU-T Q.1901 Recommendation - Technical Report
TRQ.3010: Operation of the bearer independant call control (BICC) protocol
with AAL type 2 signalling protocol (CS-1) |
|
|
Technical Report TRQ.3020: Operation of the
bearer independant call control (BICC) protocol with broadband integrated
services digital network user part (B-ISUP) for AAL Type 1 adaptation |
|
|
Supplement to ITU-T Q.2900 series Recommendations: Broadband
integrated services digital network (B-ISDN) -Digital subscriber signalling
system No. 2 (DSS2) - User-network interface layer 3 - Overview of B-ISDN
DSS2 signalling capabilities |
|
|
Broadband integrated services digital network
(B-ISDN) – Digital subscriber signalling system No. 2 (DSS2) and signalling
system No. 7 (B-ISUP) – Support of services over IP-based networks |
|
|
Technical Report - Overview of Signalling and Protocol Framework
for an Emerging Environment (SPFEE) |
|
|
Technical Report: Signalling and protocol
framework for an emerging environment (SPFEE) – Specifications for service
access |
|
|
Service Modelling: Evolution to the use of object oriented
techniques |
|
|
Supplement to ITU-T Recommendation Q.1701 -
Roadmap to IMT-2000 Recommendations, Standards and Technical Specifications
|
|
|
Technical report TRQ.2141.0: Signalling requirements for the
support of narrowband services over broadband transport technologies -
Capability set 2 (CS-2) |
|
|
Technical Report TRQ.2141.1: Signalling
requirements for the support of narrow-band services via broadband transport
technologies - CS-2 signalling flows |
|
|
Technical Report TRQ.2401: Transport control signalling
requirements - Signalling requirements for AAL type 2 link control capability
set 2 |
|
|
Technical report TRQ.2410: Signalling
requirements capability set 1 for support of IP bearer control in BICC
networks |
|
|
Technical Report TRQ.2500: Signalling Requirements for the
support of the call bearer control interface (CS-1) |
|
|
Technical report TRQ.3030: Operation of the
bearer independent call control (BICC) protocol (CS-2) with IP bearer control
protocol (IPBCP) |
|
|
DSS1 and DSS2 Messages and information element identifiers |
|
|
Technical Report TRQ.2600: BICC signalling
transport requirements – Capability set 1 |
|
|
Technical Report TRQ.2700: Requirements for signalling in access
networks that support BICC |
|
|
Technical Report: Reference document on
API/object interface between network control and application layer |
|
|
Technical Report TRQ.2003: Roadmap to the BICC protocol
Recommendations, BICC interworking Recommendations, and BICC requirement
supplements |
|
|
Technical Report TRQ.2402: Transport control
signalling requirements - Signalling requiremnts for AAL type 2 Link control
Capability Set 3 |
|
|
Technical Report TRQ.2415: Transport control signalling
requirements - Signalling requirements for IP connection control in radio
access networks Capability Set 1 |
|
|
Technical Report TRQ.2800: Transport control
signalling requirements - Signalling requirements for AAL type 2 to IP
interworking Capability Set 1 |
|
|
Technical Report TRQ.2815: Requirements for interworking
BICC/ISUP network with originating/destination networks based on Session
Initiation Protocol and Session Description Protocol |
|
|
Technical Report TRQ.2830: ATM-MPLS network
interworking signalling requirements |
|
|
Emergency services for IMT-2000 networks - Requirements for
harmonization and convergence |
|
|
Guideline document for specifying API/object
interface between network control and application layer |
|
|
Technical Report TRQ.2840: Signalling requirements to support IP
telephony |
|
|
Technical Report TRQ.2145: Requirements for a
Narrowband Signalling Syntax (NSS) |
|
|
Signalling requirements for IP-QoS |
|
|
NNI mobility management requirements for
systems beyond IMT-2000 |
|
|
Signalling requirements to support the International Emergency
Preference Scheme (IEPS) |
|
|
Signalling requirements at the interface
between SUP-FE and S-CSC-FE |
|
|
Signalling requirements at the interface between AS-FE and
S-CSC-FE |
|
|
Organisation of NGN Service User Data |
|
|
Signalling requirements to support the emergency
telecommunications service (ETS) in IP networks |
|
|
Organization of transport user data |
|
|
Signalling flows and parameter mapping for resource control
|
|
|
|
|
|---|